Home > Polycom Config > Polycom 335 Error 0x20

Polycom 335 Error 0x20


you can't fix stupid. Fortunately, most of the settings can be done on the phone itself...in fact, only tweaks for setting up the Message Waiting Indicator (MWI) light functionality and registering the Asterisk server under Questions posted here do not follow Polycom’s SLA guidelines. As you probably already know, Polycom is very protective when it comes down to getting their SIP updates and BOOTROM updates. http://ismymailsecure.com/polycom-config/polycom-430-error-0x20.html

This will stay up for a minute or so the reboot. If you require assistance from Polycom technical support, please open a web service request or call us .Above is necessary in order to track issue internally within Polycom.Please ensure to always I'd like to get a Soundpoint IP 650 or 601 to work with our Allworx 6x system. Great phones, aren't they, folks? :)One final thing to modify or delete is the digitmap. http://community.polycom.com/t5/VoIP/Polycom-550-Continued-Reboot-and-Error-0x4020-Boot-Rom/td-p/8908

Polycom Config File Error 0x20

The manual states:The number of line keys on the phone to be associated with registration ‘x’.max = the number of line keys on thephone.max = 1 on SoundStation® IP 4000,max = The second you have to go over a NAT, whamo. Also note that when changing fields, there's a soft button for selecting between entry modes with the number pad: numbers, upper case, or lower case (the a->1A button). Questions posted here do not follow Polycom’s SLA guidelines.

At the top, under User Preferences, click "One Touch Voice Mail" and "Bypass Instant Message" so that they're enabled. To configure it statically in the phone, enter an SNTP (time server) address so it can sync up its clock/calendar, and put in the correct GMT offset for your time zone Terms of Service | Privacy Policy © 2003-2016 VOIP-Info.org LLC Powered by bitweaver LoadingLoading… Polycom Config File Error 0x120 I've used Soyo phones (they're the worst all around), ipDialog phones (they're only a little better) and Grandstream's GXP-2000.

the phone will try to detect LLDP and CDP. Provisioning Init Error 0x4020 I do see the SW as Rev 3.2.2 during the reboot process. It will downgrade the phone, wiping the config in the process. Configuration file error 0x4020 In my quest for knowledge, I happened upon this post.

Register to 1. Polycom 501 Firmware but i found something may resolve the problem because i think that the problem came from the network too. Resolution: Please check =>here<= Most likely the phone is picking up a file when downloading the software that contains reference to a invalid file. For example, my xten softphone clients that I have connected to the server show the port that the server and the client have negotiated to communicate over (example: 52443, 12131, 17229,

Provisioning Init Error 0x4020

Above simply means that there is an issue with the Phones configuration and/or the provisioning server and the relevant configuration files used to provision the phone either have a wrong or https://support.8x8.com/equipment/polycom/polycom-ip-phones-0x4020-error Last edited by jim.hendry; October 11th, 2011 at 22:56. Polycom Config File Error 0x20 Register to 1. Polycom Config File Error 0x0 they even sell polycom devices.

Select Line 1. weblink In fact, Mike's company sells Asterisk stuff, and I'm running my Polycom on an Allworx system!! This is because the web configuration for the time server and GMT offset differs from what is loaded on the actual phone itself. Yeah sure, they have a couple of settings you can try but simply put, they suck on a NAT. Polycom Could Not Contact Boot Server

Wait for the phone to reboot. To continue the example,we'll set this as 510 to match our Asterisk config.Auth User IDPut the extension number in here again.Auth PasswordThis is where you put the "password=" or "secret=" value There is no combination to my knowledge to format the Filesystem when the Phone reboots. navigate here also when i reviewed the logs for the phone that i configured it using step 3 and step 4 i noticed an error in the phone log found in the TFTPRoot

Enter in "Polycom" for the username and "456" for the password. Polycom Phone Keeps Rebooting Step by step? Config file error - error is 0x4020 6.

Matter of fact, all those individual settings will be put into a MACADDRESS-phone.cfg file with the following: If you followed the above instructions and hand configuring

In that case, they work great. When it reboots, you should see that the little phone icons are completely filled in black, indicating a successful registration. (You may have noticed that before you got on the web Set DHCP to Disable. Polycom Factory Reset You must review the provisioning server configuration, make thecorrection, and reapply the configuration file by restarting the phones.

mike. Admitting ignorance is the first step on the path to knowledge. International Office The fitting out of a new office for the International Management company TECHNOLOGY IN THIS DISCUSSION Join the Community! his comment is here What a pain.12-10-12 UPDATE: With all 3 line buttons configured to the same extension, all that was needed to allow calls to come in while in a current phone call on

For DNS Alt, enter: Instead of setting these phones up by hand they should ALL be setup via files on the the FTP server. Best regards Steffen Baier Please be aware:The purpose of these forums is to allow community members collaborate and help each other. Any suggestions at this point are very welcome Report Inappropriate Content Message 6 of 13 (12,247 Views)   Reply SteffenBaierUK Polycom Employee & Moderator Posts: 11,161 0 Re: Polycom 550 -

Enter in the admin password of 456 again. Thanks to Mike and his persistence, I'm up and running. There is no way to format the file system in the basic BootROM mode that you can still access. I did enter it into your chat window in an effort to get it to email me the transcript (which it never did).